How To Cut Rebar With The BNCE-20 Cutting Edge Saw

Posted on February 15, 2017

how-to-cut-rebar

Cutting and bending rebar is one of the most tiresome tasks for professional contractors on the job site. Most use a blowtorch to painstakingly remove excess material, which can be expensive and time-consuming. It can also be risky and cause accidents due to the high temperature of the rebar after it is cut. Learning how to cut rebar with the BNCE-20 cutting saw is a great alternative to the blow torch.

The BNCE-20 Cutting Edge Saw

BNCE-20 was created with portability in mind. The designers wanted to make something that could easily be carried to and used at the job site. This cutting saw is very compact and efficient. Here are some of the many benefits of this saw:

  • It has a 3-position side and rotating trigger handle. They allow the contractor to maneuver easily in tight areas and use multiple cutting positions.
  • The cutting blade is made of carbide and is very durable. It would be damaged easily, even after multiple uses.
  • The resilient blade can cut through all kinds of materials, including rebar, coil rod, all-thread rod, pipe, EMT conduit, burglar bars, and tubing, etc.
  • The uniquely designed blade will cut the material flush against the surface in precast installations.
  • This tool performs a cold cut so the rebar is cool to the touch after the work is done. It’s also designed to produce minimal sparks.

 

How to Cut Rebar with the BNCE-20

The BNCE-20 is very easy to use on the site. The lightweight design doesn’t mean that it’s not sturdy so you don’t have to worry about it becoming damaged on the worksite. Here’s what you need to know about how to cut rebar with the BNCE-20:

  •  On-Site and Pre-Cast Situations – This tool is suitable for both on-site and pre-cast situations. For example, if there’s a piece of rebar sticking out of the concrete structure, you can cut it flush against the surface easily. You can also cut the material in your workshop.
  •  Change the Handle for Better Positioning –The handle is removable so you can change the direction of it to get into tight corners on site. All you need to do is detach the handle from the top and attach it to the side. The process is simple and the handle is secure once you screw it in all the way. There will be no slips and the handle won’t come off due to force or pressure.
  •  Keep the Rod or Rebar Steady Before You Use the Saw – It’s important to keep the rod or rebar steady before you use the saw if you want a clean, straight cut. The saw will not cause any burrs so you don’t need to do any additional filing. Just make sure the metal is properly secure before you put the saw to it.
  •   Cut Straight and Steady – Once the tool handle is in the right place and the rebar is securely handled, you can just place the blade against the metal and apply slight pressure to cut. The blade is sharp enough and fast enough to ensure you don’t need to apply too much force or effort to achieve a clean and proper cut.

As you can see, the BNCE-20 is an excellent to have on your construction site. You can easily figure out how to cut rebar with this tool because the operating mechanism is clear and simple. This tool is worth the investment if you’re a professional contractor as it will save you some time and effort on the job.