3 3/4" wide x 7" high x 2" deep

(Weight - 28 lbs. / box of 50)

Open back simplifies mounting and connections. The service box is nailed or screwed to a framing stud, flush with the mounting surface prior to the application of stucco or siding.  The cover is secured with a slotted screw. Also available with the following  embossed lids:

• BN900 - “Telephone” embossed lid
• BN900TV - “TV” embossed lid
• BN900G - “Ground” embossed lid
• BN900X - Blank lid

14 1/4" wide x 4 1/2" high x 1 1/2" deep

(Weight - 36 lbs. / box of 40)

Open back simplifies mounting and connections. The service box is either nailed or screwed between two 16” centered studs, flush with the mounting surface prior to the application of stucco or siding.  The cover is secured with two slotted screws. Available with the following embossed lids:

• BN1020 -“TELEPHONE”
• BN1020TV -“TV” 

14 1/4" wide x 11 1/4" high x 5 1/2" deep

(Weight - 700 lbs. per pallet of 100)

The 1100C-E box when expanded is the same size as the standard 1100C. We have made it this way to conserve storage. This enclosure is installed between 16” centered studs prior to the application of final exterior siding material. The enclosure has an open top and bottom to the inside wall and a 1/2” plywood backboard for mounting utility equipment. The fully enclosed lid  seals off outside weather and insects and is fastened with two zinc-coated phillips sheet metal screws.  You can order the lid with either “Telephone” or “TV” embossments. This enclosure is also available with an optional four position ground bar. It is Nema 3R rated, UL listed and has a powder coat desert tan finish.

14-3/4” wide x 11-1/4” high x 5-1/2” deep

(Weight - 360 lbs. per pallet of 50)

This enclosure is installed between 16” centered studs prior to the application of final exterior siding material.  This enclosure typically houses demarcation utility elements for telephone and/or cable television. The enclosure has an open top and bottom to the inside wall and a 1/2” plywood backboard for mounting utility equipment. The fully enclosed lid  seals off outside weather and insects and is fastened with two zinc-coated phillips sheet metal screws.  You can order the lid with either “Telephone” or “TV” embossments. This enclosure is also available with an optional four position ground bar. It is Nema 3R rated, UL listed and has a powder coat desert tan finish

14-3/4" wide x 11-1/4" high x
5-1/2" deep

(Weight - 13 lbs.)

This fully enclosed box is installed between 16" center studs prior to the application of final exterior siding material. This enclosure typically houses demarcation utility elements for telephone and/or cable television. The enclosure has a hinged door that locks with a standard can wrench. It also has a 3/4" plywood backboard for mounting utility equipment. It has two 1" to 2" knockouts on the top and bottom. You can order the lid with either "Telephone" or "TV" embossments. This enclosure is also available with an optional four position ground bar.This enclosure is made of 18 gauge zinc-coated steel and has a durable desert tan powder coat finish. This box is NEMA 3R rated and UL listed.

14 3/4" wide x 24" high x 5-3/4" deep

(Weight - 28 lbs.)

This is a large capacity enclosure that can accommodate 25-pair protectors and modular interface telephone apparatus. The 3/4" plywood backboard simplifies equipment mounting with two 2" knockouts positioned in the bottom of the case plate. Simply fasten the enclosure between 16" center studs prior to application of final exterior siding material. The fully enclosed hinged door keeps weather and insects from entering the structure and locks with a standard can wrench. This enclosure should be mounted 36" above final grade and can be stacked with additional units if more space is needed. This is a 16 gauge metal enclosure with a desert tan powder coat finish. This box is NEMA 3R rated and UL listed.

14-3/4" wide x 24" high

(Weight - 12 lbs. each)

These are semi-recessed exterior access doors for new construction. They have open backs and are installed with nails or screws between 16" center studs prior to application of final exterior construction finish. They are made of 16 gauge zinc-coated steel with a desert tan powder coat finish with a hinged door that uses a standard can wrench for entry. This is an excellent application for back-flow valves for fire sprinklers and standard fire alarm systems.

14-1/2" wide x 18" tall x 6-1/2" deep

(Weight - 15 lbs.)

14-1/2" wide x 24" tall x 6-1/2" deep

(Weight - 15 lbs.)

14-1/2” wide x 24” tall x 6-1/2” deep

(Weight - 22 lbs.)

14-1/2" wide x 32" tall x 10" deep

(Weight - 28 lbs.)

14-1/2” wide x 32” tall x 6-1/2” deep

(Weight - 21 lbs.)

This Fiber-to-the-home box is large enough to allow a standard electrical outlet for a UPS power source.  This enclosure is 18 gauge zinc-coated steel with a desert tan powder coat finish.  The lid is attached with six phillips screws and the inside box is open top and bottom to allow cable to be coiled in the wall and it includes a 1/2” plywood backboard and a four-position ground bar. This enclosure will install between 16” center studs in new construction and meets NEMA 3R rating and is UL listed.

14-1/2” wide x 32” tall x 6-1/2” deep

(Weight - 22 lbs.)

14-1/2” wide x 32” tall x 7” deep

(Weight - 22 lbs.)

This enclosure is identical to the 14326W-UL except it has a hinged door and is 1/2” deeper. The material is zinc-coated steel with a desert tan powder coat finish.  The lid is attached with a piano hinge and has a standard hex-head latch. The inside box is open top and bottom to allow cable to be coiled in the wall space and it includes a 1/2” plywood backboard. This enclosure will install between 16” center studs in new construction and meets NEMA 3R rating and is UL listed.