GT-3030U 3/8″ Short Lipped Flange (Box of 100)
Box of 100
The most trusted name in core drilling anchors that are 15% stronger than the competition!
These 3/8" drop in Sanko anchors mount into heavy materials like concrete for a semi-flush installation. Box of 100 concrete anchors.
The most trusted name in core drilling anchors that are 15% stronger than the competition Versatile - will work with bolts and threaded rod in any length Recessed - drill the hole the same length as the anchor for a flush finish. Drill deeper for more embedment into masonry projects If the anchor is no longer needed, simply plug or fill with cement to make the surface smooth again For proper installation, we recommend the use of our setting tool Values shown on the chart are average ultimate values and are offered only as a guide and are not guaranteed. A safety factor of 4:1, or 25%, is generally accepted as a safe working load. The concrete compressive strength should be 2,987 psi Inside threads are machine rolled rather than cut for superior holding strength
GT-3030U | Similar to the CT-type anchor, these drop-in anchors are designed with a flanged (lipped) top for semi-flush installation in concrete. They are set exactly the same way with an expansion plug and a setting tool
|Outside Diameter x Length||1/2" x 1-3/16"|
|Drill Bit Diameter||1/2"|
|Tension Load||2,867 (lbs)|
|Setting Tool Required||HT-3040|
CT-3040U 3/8″ Sanko Drop-In “Grip” Anchor (Box of 50)
C-4090U 1/2″x3-9/16″ Hammer Drive Strike Anchor (Box of 30)
C-4070U 1/2″ x 2-3/4″Hammer Drive Strike Anchor (Box of 30)