BNCE-20 Cutting Edge Saw


This compact and lightweight tool has a 3-position removable side handle and a rotating trigger handle that provides the operator with multiple cutting positions and increased maneuverability in tight areas. This amazing tool can cut a variety of materials including rebar, all-thread rod, coil rod, EMT conduit, pipe, tubing, burglar bars and more. It is designed to cleanly cut the material FLUSH with the surface.

The Cutting Edge Saw has a unique flush-cutting blade guard that greatly reduces blade exposure. It also has a double insulated power harness and is ETL/UL Certified & Listed. The tool is designed to emit minimal cutting sparks and the cut material is burr-free and cool to the touch.BN Products-USA provides replacement parts, TCT cutting blades, technical support, customer service and a network of repair centers. Each Cutting Edge Saw is warranted to be free of defects from workmanship and materials for the period of one year from the date of original purchase.

TCT Cutting Blades have a limited warranty. Benner-Nawman, Inc. provides replacement parts, TCT cutting blades, technical support, customer service and a network of repair centers. Each Cutting Edge Saw is warranted to be free of defects from workmanship and materials for the period of one year from the date of original purchase. TCT Cutting Blades have a limited warranty.

Parts List for the BNCE-20: CLICK HERE

 

STANDARD EQUIPMENT INCLUDES

• The Cutting Edge Saw
• Two TCT Cutting Blades
• Extra Set of Motor Carbon Brushes
• Removable Side Handle
• Chip Collector Attachment
• Tool Kit & Operations Manual
• Plastic Molded Carrying Case
•  SEE THE  VIDEO SECTION BELOW

VOLTAGE 120
HERTZ 60
AMPS 9
WATTS 1100
BLADE SIZE 4.375" (110 mm)
BLADE TYPE (2 ea.) Tungsten Carbide Tipped
BLADE NUMBER OF TEETH 24
BLADE KERF 1.6 mm
NO LOAD RPM 2,000
DEPTH OF CUT 860" (21.8 mm)
CONSTRUCTION TYPE DOUBLE INSULATED
CORD TYPE 18 AWG, 2 CORD
PLUG TYPE U.S. POLARIZED 2-PRONG
CORD LENGTH 10 ft. (3 m)
TOOL LENGTH 20.3" (515 mm)
TOOL WIDTH 5.5" (140 mm)
TOOL HEIGHT 3.9" (99 mm)
NET TOOL WEIGHT 7.6 lbs. (3.5 kg)

2 Questions about “BNCE-20 Cutting Edge Saw”



  1. Steve Crutchfield
    January 23rd, 2013 3:20 pm

    Can I cut a piece of 1 5/8″ strut material? It would appear from the video that the jaw size
    will not allow an 1 5/8″ piece of material to enter?



  2. mel
    January 23rd, 2013 4:41 pm

    Thanks for your question… I would take a look at our BNMPC-135 Mini Metal Saw (http://www.bnproducts.com/tools/bnmpc-135-mini-metal-saw/)for cutting strut material. I often use this in demonstration at trade shows like the World of Concrete coming up in Las Vegas. – MK



Ask a question about this product