JMB-25H25 #8 Rebar Cutter and Bender Combination Kit

PRODUCT SUMMARY

• JMB-25H25 #8 Rebar Cutter and Bender Combination Kit

  The JMB-25H25 rebar bender cutter kit from BN Products-USA combines the JMB-25H electric-mechanical rebar bender with the DC-25X hydraulic rebar cutter in one heavy-duty stationary workstation. Designed for reinforcing steel fabrication, this combination kit provides efficient rebar bending and cutting capabilities for construction and production applications.

  The JMB-25H25 accommodates rebar up to #8 (25mm), combining two essential tools into one convenient fabrication station.

  Electric-Mechanical Rebar Bender and Hydraulic Cutter

  The JMB-25H25 combination kit includes two specialized machines designed to work together.

  JMB-25H Electric-Mechanical Rebar Bender

  The JMB-25H bends reinforcing steel from 0 to 180 degrees. Its electric-mechanical operation supports accurate bending for a variety of reinforcing steel fabrication requirements.

  DC-25X Hydraulic Rebar Cutter

  The DC-25X hydraulic rebar cutter provides cutting capabilities for reinforcing steel. The cutter can remain secured in the stationary workstation or be removed for portable cutting applications.

  Features and Benefits

  • Combination Workstation: Integrates rebar bending and cutting equipment into one heavy-duty stationary housing.
  • #8 Rebar Capacity: Designed for reinforcing steel up to #8 (25mm).
  • 0–180° Bending Range: The JMB-25H provides a wide range of bending angles for rebar fabrication.
  • Removable Hydraulic Cutter: The DC-25X can be removed from the combination workstation for portable applications.
  • Foot Pedal Operation: The stationary cutter can be operated using the included foot pedal switch.
  • Convenient Working Height: The bending table is positioned at a practical working height for production applications.
  • Efficient Fabrication Setup: The combination stand allows both machines to operate as part of one organized workstation.

  Designed for Rebar Fabrication

  The JMB-25H25 rebar bender cutter kit is designed to support efficient reinforcing steel preparation in construction and production environments.

  By combining the JMB-25H electric-mechanical bender and DC-25X hydraulic cutter, operators can perform cutting and bending tasks at one workstation.

  The removable cutter also provides flexibility when portable cutting is required, while the stationary configuration offers convenient foot pedal operation.

  Common Applications

  The JMB-25H25 combination kit is suitable for:

  • Concrete reinforcement preparation
  • Reinforcing steel fabrication
  • Construction site rebar processing
  • Rebar cutting and bending operations
  • Production shop applications
  • Stationary rebar fabrication workstations

  Product Specifications

  • Model: JMB-25H25
  • Product Type: Rebar Cutter and Bender Combination Kit
  • Rebar Bender: JMB-25H
  • Bender Type: Electric-mechanical
  • Rebar Cutter: DC-25X
  • Cutter Type: Hydraulic
  • Maximum Rebar Size: #8 (25mm)
  • Bending Range: 0–180 degrees
  • Workstation: Heavy-duty stationary combination housing
  • Cutter Configuration: Removable for portable use
  • Stationary Cutter Control: Foot pedal switch

  Product Manuals and Downloads

  For additional technical information, operating instructions, maintenance requirements, and replacement parts, refer to the following product documentation.

DC-25X:  Manual  |   |  Parts Guide   |  Brochure

JMB-25H:  Manual  |  Parts Guide  |  Roller Selection Chart