The DC-16LZ is a medium-duty rebar cutter that will safely, efficiently, and cleanly cut rebar up to #5 (5/8”) diameter grade 60.  This self-contained electric/hydraulic unit will also cut other items like chain, bolts and rod but is specifically designed for rebar.  The DC-16LZ is intended for effortless medium-duty applications on vertical and horizontal rebar cutting applications.  This tool would be a great asset for swimming pool, masonry, and ICF contractors.  The DC-16LZ is a cold-cutting shear, unlike saws with abrasive blades and cutting torches, there are no sparks or flame. A safety relief valve for retracting the piston and a cutting guard are standard features.  Ships complete in a carrying case with hydraulic oil and a tool kit.

The DC-16W portable heavy-duty rebar cutter will safely, efficiently, and cleanly cut rebar up to #5 (5/8”) diameter grade 60.  This self-contained electric/hydraulic unit will also cut other items like chain, bolts and rod but is specifically designed for rebar. The DC-16W cutter is designed for effortless vertical and horizontal cutting applications.  The DC-16W is a cold-cutting shear unlike saws with abrasive blades and cutting torches.  There are no sparks or flame and no trailing hoses to snare equipment or worker’ feet.  A safety relief valve for retracting the piston and a cutting guard are standard features.  Ships complete in a carrying case with hydraulic oil and a tool kit.

The DC-20WH portable heavy-duty rebar cutter will safely, efficiently, and cleanly cut rebar up to #6 (3/4”) diameter grade 60.  DIAMOND originated this concept in 1972; continuous development has led to higher output, lower weight, and even greater toughness and durability.  The DC-20WH is a cold-cutting shear unlike saws with abrasive blades and cutting torches.  There are no sparks or flame and no trailing hoses to snare equipment or worker’ feet.  Ideal for cutting epoxy-coated rebar.  Fastest, safest, and most economical way to cut rebar on the job.  A safety relief valve for retracting the piston and a cutting guard are standard features.    Ships complete in a carrying case with hydraulic oil and a tool kit.

The DC-25X portable heavy-duty rebar cutter will safely, efficiently, and cleanly cut rebar up to #8 (1”) diameter grade 60.  The DC-25X cutter is ideal for a small fabrication shop, especially if used with our CWS-2025 WorkStation.  Because our rebar cutters feature a locking trigger switch, the cutter can be operated with a foot pedal switch and our GFI protected electrical outlet.  There are no sparks or flame so it also works great on epoxy-coated rebar.  It’s the fastest, safest, and most economical way to cut rebar on the job.  A safety relief valve for retracting the piston and a cutting guard are standard features.  Ships complete in a steel carrying case with hydraulic oil and a tool kit. 

The DC-32WH portable heavy-duty rebar cutter will safely, efficiently, and cleanly cut rebar up to #10 (1 ¼”) diameter grade 60.  The DC-32WH cutter is ideal for bridge and highway work, and in small rebar fabrication shops.  This unit is available in combination with a DBD-32X bender on a stand, in a WorkStation table and on a trailer.  There are no sparks or flame so it also works great on epoxy-coated rebar.  It’s the fastest, safest, and most economical way to cut rebar on the job.  A safety relief valve for retracting the piston and a cutting guard are standard features.  Ships complete in a wooden carrying case with hydraulic oil and a tool kit.

The HB-16W portable heavy-duty electric/hydraulic rebar bender helps save valuable man-hours by bending rebar up to 5/8” (#5) grade 60 from 0-135 degrees in-place at the job site.  Other features include a double insulated electric motor and a removable bending guide for repeating the same angle bend.  The optional 90 degree bending shoe and collar make it simple to repeat 90 degree bends without a guide.  The optional bending collar increases the bending radius and minimizes rebar breakage, especially on #5 grade 60.  This portable electric/ hydraulic rebar bender ships complete in a steel carrying case with hydraulic oil and a tool kit.  Solves bending applications other tools can’t even attempt.

The DBR-25WH is a portable heavy-duty electric/hydraulic rebar bender and straightener.  It helps save valuable man-hours by cleanly and efficiently bending or straightening bent rebar.  It functions as a simple 90-degree portable electric rebar bender.  The interchangeable bending hook covers rebar diameters from #4 to #8 grade 60.  Maximum pressure for bending and straightening ranges from 8.5 to 11 tons.  It’s portable and versatile enough to bend or straighten rebar in-place with its push/pull hydraulic capabilities.  It will bend a 90-degree angle in only (4) seconds.  The bending head also rotates 360 degrees.  Ships complete in a wooden carrying case with hydraulic oil and a tool kit.  Solves bending applications other tools can’t even attempt.

The DBD-16X heavy-duty portable rebar bender helps save valuable man-hours by bending rebar up to #5 (5/8”) grade 60 at the job site or in your shop.  This strong electrical-mechanical bender has two preset angle locks for repeating the same angle bend.  The dial-type angle selector can be set to accurately bend any angle from 0-180 degrees.  Bends (3) each #3 rebar or (2) each #4 rebar or (1) each #5 rebar at one time.  An emergency stop switch and two side lifting handles are standard features.  Ships complete with set of (6) bending rollers in a steel carrying case, a tool kit, and a standard foot pedal control switch for hands-free bending.

The DBD-20X heavy-duty portable rebar bender helps save valuable man-hours by bending rebar up to #6 (3/4”) grade 60 at the job site or in your shop. This strong electrical-mechanical bender has two preset angle locks for repeating the same angle bend. The dial-type angle selector can be set to accurately bend any angle from 0-180 degrees. An emergency stop switch and two side lifting handles are standard features. The DBD-20X portable rebar bender comes complete with set of (6) bending rollers in a steel carrying case, a tool kit, and a standard foot pedal control switch for hands-free bending.

The DBD-25X heavy-duty portable rebar bender helps save valuable man-hours by bending rebar up to #7 (7/8”) grade 60 at the job site or in your shop.  This strong electrical-mechanical bender has two preset angle locks for repeating the same angle bend.  The lever-type angle selector can be set to accurately bend any angle from 0-180 degrees.  An emergency stop switch and two lifting handles are standard features.  The DBD-25X portable rebar bender comes complete with a set of (6) bending rollers in a steel carrying case, a tool kit, a bender cover, and a standard foot pedal control switch for hands-free bending.  Optional stands, circular pattern rollers, and a highway trailer unit are available.

The DBD-32X heavy-duty portable rebar bender helps save valuable man-hours by bending rebar up to #9 (1-1/8”) grade 60 at the job site or in your shop.  This strong electrical-mechanical bender has two preset angle locks for repeating the same angle bend.  The lever-type angle selector can be set to accurately bend any angle from 0-180 degrees.  A bend counter with reset, a voltage meter, and two lifting handles are standard features.  The DBD-32X portable rebar bender comes complete with set of (7) bending rollers in two steel carrying cases, a tool kit, a bender plastic cover, and a standard foot pedal control switch for hands-free bending.  Optional stands and a highway trailer unit are available. 

The HTBC-16CU combination bender and cutter are rated for 5/8” grade 60 rebar.  Quickly and safely bend rebar from 0 to 180 degrees.  The rebar cutter can be removed for portable in-place applications or mounted in a stationary position.  Both the bender and cutter can be operated hands free with the standard foot pedal.  The hand truck features 10” pneumatic tires for use on rough terrain, an adjustable handle for greater maneuverability and a storage bin for accessories.  Standard electrical outlets and a toggle switch let you change operations from bending to cutting, the GFI plug is a standard safety feature.  Unit includes a DBD-16X bender, a foot pedal switch, a DC-16W cutter and HTC-16X hand truck assembly. 

The DBC-20X combination bender and cutter is rated for 3/4” grade 60 rebar. This ultimate combination unit combines the very popular DC-20WH rebar cutter and the DBD-20X rebar bender together on a heavy-duty powder-coated skidded housing.  The bender and cutter are simply plugged into the weather-protective electrical outlets, no hard wiring.  The DC-20WH cutter can be removed and used in a portable application or secured in the stationary position with U-bolts and operated hands-free by a standard foot pedal switch.  A toggle switch allows you to go from bending to cutting, the GFI plug is a standard safety feature.  This unit is shipped fully assembled and includes a steel case with six bending rollers and a foot pedal control switch.

The DBC-25X combination rebar bender and cutter was designed for the contractor who wants an all-in-one unit.  Here are two super tools in one great package; essentially this unit is a DBD-25X bender with a built-in DC-25X cutter.  The rebar bender is rated for #7 grade 60 and the rebar cutter is rated for 1” grade 60.  A toggle switch allows you to go from bending to cutting.  The DBC-25X portable rebar bender comes complete with a set of (6) bending rollers in a steel carrying case, a tool kit, and a standard foot pedal control switch for hands-free bending.  The picture above is shown with the optional bender stand part #1BR51312. 

These are essential combination rebar bender and cutter units.  They simply combine the very popular DBD-25X bender with the DC-20WH or DC-25X rebar cutter both together on a stationary stand.  The main advantage to owning this versatile combination unit is that the rebar cutter can be simply removed and used in any portable application or locked into a stationary position and then operated by a standard foot pedal switch.  The other advantage is production; the bender table is at the ideal working height and the DBD-25X bends rebar from 0 -180 degrees.  The BCSE-25X combination stand joins the bender & cutter both together.

These are essential combination rebar bender and cutter units.  They simply combine the very popular DBD-32X bender with the DC-25WH or DC-32X rebar cutter both together on a stationary stand.  The main advantage to owning this versatile combination unit is that the rebar cutter can be easily removed and used in any portable application or locked into a stationary position and then operated by a standard foot pedal switch.  The other advantage is production; the bender table is at the ideal working height and the DBD-32X bends rebar from 0 -180 degrees.  The BCSE-32X combination stand joins the bender & cutter both together.

The CWS-2025 Workstation is the perfect height for increasing your rebar cutting production.  It’s designed to securely hold the DIAMOND model DC-20WH or DC-25X rebar cutter.  Now you can operate your portable rebar cutter hands free with just a foot switch.  The DC-20WH or DC-25X rebar cutter can be removed for use in portable applications. This Workstation includes an electrical outlet for plugging in the rebar cutter, a GFI plug and a foot pedal switch.  This is a sturdy design with a 12-gauge heavy-duty galvanized sheet metal worktop.  Modular design allows for other Workstations to be bolted together.  Shipped partially assembled complete with hardware and instructions.  (Rebar cutters and foot operated switch are sold separately). 

The BWS-25X and BWS-32X Workstations are the perfect height for increasing your rebar bending production.  They’re designed to fit around the DIAMOND model DBD-25X or DBD-32X rebar bender on a stand.  The DBD-25X or DBD-32X rebar bender can be easily removed for use in any portable application, it simply slides in and out.  This is a sturdy design with a 12-gauge heavy-duty galvanized sheet metal worktop.  Modular design allows for other Workstations to be bolted together. Shipped partially assembled complete with hardware and instructions. (DBD-25X and DBD-32X rebar benders, stands & foot operated switches sold separately) 

The TUBC-25X simply combines the very reliable DBD-25X rebar bender and the DC-25X rebar cutter.  This heavy-duty highway-ready trailer unit comes standard with a weather protected electrical control box, 24”storage tool box, 4” heavy duty workshop vise, one front jack stand, two rear stabilizer jack stands, 2” diameter ball hitch coupler, running lights, wiring harness, safety chains, 14-gauge diamond thread steel bed, 46”x 60” bed size, a rebar cutter guide roller, a space for securing and transporting up to a 6 KW gasoline generator, six tie-down hooks and straps, two ST175/80D13 tires, 2,200 lb. capacity axle, rust-resistant finish, and the DBD-25X bender & DC-25X  cutter.  Spare tire holder & spare tire are optional.